Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Tampa, FL
Electric gate repair in Tampa typically costs between $180 and $640 for most mechanical and electrical fixes, with motor replacement running $700 to $1,900 depending on the brand and pull force required. Most repairs are completed in a single visit. Carver Gate Repair Tampa dispatches background-checked, uniformed technicians who diagnose the problem, write a firm price, and fix it on the spot whenever parts allow.
We work exclusively on gates and gate motors. That narrow focus matters when a limit switch fails on a LiftMaster slide operator or a BFT swing arm loses its travel memory. A generalist contractor might spend an hour figuring out what they’re looking at. Our technicians see these failures weekly across Tampa neighborhoods from Carrollwood to FishHawk Ranch, and we stock replacement parts for the brands already installed on most Tampa properties. For the full scope of what we handle, see our Gate Repair service page or the main Gate Repair in Tampa overview.
When You Need Electric Gate Repair
Electric gates fail in predictable ways. Here are the symptoms Tampa homeowners call us about most often:
- The gate opens halfway and reverses. This usually points to a failed limit switch, a worn gear rack, or an obstruction sensor out of alignment. Our techs trace it by testing each component in sequence rather than guessing.
- The motor hums but the gate doesn’t move. A seized drive chain, stripped gear, or failing capacitor inside the operator. Common after Tampa’s summer humidity and salt air take their toll on exposed mechanical parts.
- The gate won’t respond to remotes or keypads. Often the receiver board, antenna wiring, or a loop detector that’s stopped sensing your vehicle. Mighty Mule and FAAC systems have distinct failure patterns here that our technicians recognize immediately.
- The gate slams shut or drifts open on its own. This can mean a broken spring on a swing gate, hydraulic fluid loss on a BFT operator, or a control board sending false signals. A drifting gate is a safety issue and should be addressed the day you notice it.
- Intermittent operation, especially after rain. Tampa’s afternoon thunderstorms expose bad seals, corroded terminal blocks, and water intrusion in low-mounted control boxes. We repair the cause, not just the symptom.
- The gate is stuck open or closed after a power surge. Surge damage from Florida lightning can fry a control board or transformer. If your gate stopped working after a storm, shut off the breaker at the disconnect switch and call us before forcing anything.
If your gate is doing any of these things, call (850) 533-8293. A live person picks up, 24 hours a day, including weekends.
Our Electric Gate Repair Process
Every job follows the same sequence, so you know exactly what to expect before, during, and after the repair:
- You call, a person answers. No voicemail tree, no “we’ll call you back.” We log your address, gate type, and the symptom over the phone, then schedule a firm arrival window that works for you.
- The technician diagnoses the failure. We test the operator, control board, safety sensors, power supply, and mechanical components systematically. On a LiftMaster slide gate in Westchase, for example, we’ll check the photo eyes, the limit cams, the chain tension, and the control board inputs before recommending anything.
- You receive a written price before work starts. The number you approve is the number you pay. No revised estimates, no surprise line items, no “while we’re here” upsells. If you decline the repair, there’s no obligation.
- We complete the repair with the right parts. Because we’re trained on nine brands including FAAC, BFT, LiftMaster, and Mighty Mule, we install the correct replacement components matched to your existing system, not whatever fits from the truck.
- We test the full cycle repeatedly. Open, close, obstruction detection, remote range, keypad function, and safety reversal. We don’t leave until the gate operates correctly under load at least a dozen consecutive cycles.
- You get the 365-Day Done Right Promise in writing. Every repair carries a written guarantee, good for one full year from the date of service. If the same repair fails within that window, we return and fix it at no charge.
Electric Gate Repair Pricing in Tampa
Here’s what Tampa homeowners can expect to pay for common electric gate repairs, including how much gate repair costs in Tampa, FL:
| Repair Type | Typical Cost Range in Tampa |
|---|---|
| Limit switch replacement | $150 – $280 |
| Loop detector repair or replacement | $180 – $340 |
| Remote receiver board replacement | $190 – $375 |
| Photo eye / safety sensor repair | $140 – $260 |
| Control board replacement | $300 – $700 |
| Gate motor replacement (operator only) | $700 – $1,900 |
| Chain, gear rack, or wheel replacement | $220 – $520 |
What moves the price of gate repair? The brand of operator, the gate’s weight and length, whether the failure is electrical or mechanical, and accessibility of the control housing. A BFT hydraulic swing operator on a 16-foot iron gate in Davis Islands costs more to replace than a Mighty Mule light-duty operator on a 10-foot aluminum gate in Brandon. We’ll tell you the exact number before we touch a screwdriver.
Estimates are free. Every quote is written, and the written price is the final price.
FAQs – Electric Gate Repair
How much does electric gate repair cost in Tampa?
Most electric gate repairs in Tampa run between $180 and $640 for common fixes like limit switches, sensor issues, and receiver boards. Motor replacement ranges from $700 to $1,900 depending on brand and gate weight. We provide a written price before any work starts, so you’ll know your exact cost on the spot. Call (850) 533-8293 for a free estimate.
Can you fix my electric gate the same day?
Yes, in most cases we can complete repairs the same day we diagnose the problem. Our trucks carry common replacement parts for LiftMaster, FAAC, BFT, and Mighty Mule operators, so there’s no multi-day wait for parts on the majority of jobs. Tampa’s traffic being what it is, we schedule firm arrival windows so you’re not waiting around all day.
Is it cheaper to repair or replace my gate motor?
If your operator is under 10 years old and the failure is a single component like a capacitor, gear, or limit switch, repair is almost always cheaper. If the control board is fried and the motor is 15 years old, replacement usually makes more sense. We’ll show you the repair cost and the replacement cost side by side and let you decide. We don’t push replacements when a $200 fix will do.
What brands of electric gate motors do you repair?
We repair and service nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are trained on each brand’s specific control architecture and failure patterns, which means faster diagnosis and correct repairs the first time.
Do you offer a warranty on electric gate repairs?
Every repair Carver Gate Repair Tampa performs includes the 365-Day Done Right Promise, a written guarantee that covers the repair for one full year from the date of service. If the same issue recurs within that year, we return and make it right at no charge. That guarantee is in writing on every single job, not just the big ones.
Why does my electric gate only work sometimes?
Intermittent operation in Tampa is usually caused by moisture intrusion from our heavy summer rains, a failing loop detector that loses vehicle detection, or a control board with a degraded solder joint that behaves differently as it heats and cools. These issues don’t fix themselves and tend to fail completely at the worst possible moment. Calling (850) 533-8293 sooner rather than later usually means a smaller repair bill.
Why Tampa Homeowners Call Carver Gate Repair
Lonnie Burke runs this operation by a simple rule: do what you said you’d do, when you said you’d do it, for the price you quoted. We’re authorized to operate under The Garrison Standard, which has governed the Garrison Partners family of companies since 2008. That standard isn’t a slogan. It’s a written set of requirements: background-checked technicians on every job, a written price before work begins, a written guarantee on every repair, and a live person answering the phone around the clock.
Tampa presents specific challenges for electric gates. Salt air near Bayshore and Beach Park corrodes terminals and connections faster than inland neighborhoods. The daily summer lightning across West Florida wreaks havoc on control boards and transformers. Sandy soil in South Tampa shifts gate posts over time and throws off gate alignment on slide gates. Our technicians have seen all of it, and they carry the right parts to address it on the first visit.
We don’t subcontract. The technician who arrives at your home is a Carver Gate Repair employee, in uniform, background-checked, and trained on the nine brands we service. When the job is done, the site is clean. No grease rags left behind, no spare bolts in your driveway, no half-finished work.
Call (850) 533-8293 for a free estimate on electric gate repair in Tampa. A live person answers now.
Written by Lonnie Burke, Owner at Carver Gate Repair Tampa, serving Tampa.