Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tampa
Tampa homeowners need gate repair that holds up to salt air, daily summer lightning, and heavy ornamental iron. That’s exactly what Carver Gate Repair Tampa does. We answer the phone around the clock, send a background-checked technician in a uniform, and hand you a written price before any work begins. No estimates that grow once the gate is open. If you’re dealing with a gate that won’t open, sags, or stopped responding after a storm, call (850) 533-8293 and we’ll get a crew to your property fast.
Our Gate Repair technicians work exclusively on gates and gate motors. That focus matters in Tampa, where humidity and coastal exposure punish equipment faster than inland markets. We train on LiftMaster, FAAC, BFT, and Mighty Mule systems, and we keep surge-protected control boards on our trucks because a single afternoon thunderstorm in this city can generate a week’s worth of service calls.
Why Carver Gate Repair Tampa Is Tampa’s Preferred Gate Repair Company
Homeowners around Tampa call us because we show up when we say we will and the number on the invoice matches the number we quoted. That’s not marketing language. It’s the Garrison Standard, and every Carver location operates under it. Written price before work starts. Written guarantee on every repair, good for a full year. Free second visit if the repair fails inside that window. Background-checked, uniformed technicians on every call. A live person answers our phone 24 hours a day, 7 days a week, including weekends and holidays.
Lonnie Burke runs Carver Gate Repair Tampa. The crew answers to him, and the standard he enforces is the same one that’s governed our work since 2008. We don’t subcontract gate work to generalists who install fences one day and patch drywall the next. Gate systems are all we do.
Styles & brands we work with
Sliding Gate Repair in Tampa
Sliding Gate Repair in Tampa usually means one of two things: a cantilever gate off its track, or a motor that’s straining against rusted rollers. We see both constantly in subdivisions across New Tampa and the golf course communities north of the city. The job involves getting the gate back on its rails, checking the limit switch so it stops at the right point, and testing the operator under load. A typical sliding gate repair in Tampa runs $220 to $480 for mechanical work, and $450 to $900 if the motor or control board needs replacement.
Track and Roller Rebuilds
Salt air and rain get into the roller bearings and eat them from the inside. When a roller seizes, the gate jerks and the motor overworks until it trips. We pull the gate, replace the rollers, and wire-brush the track clean before setting it back down. The fix usually takes an afternoon.
Operator Replacement on Sliding Gates
If the motor hums but the gate doesn’t move, the capacitor or drive gear is usually gone. We test the operator, confirm the diagnosis, and give you a written replacement quote before ordering anything. Most our Gate Motor Repair in Tampa jobs are done in a single visit.
Wrought Iron Gate Repair in Tampa
Wrought Iron Gate Repair in Tampa fights a specific enemy: salt air off the bay. Ornamental iron gates in Hyde Park, Seminole Heights, and along Bayshore Boulevard look strong but rust from the inside out, especially at the hinge posts and lower pickets. We cut out corroded sections, weld in new material, refinish the surface, and rehang the gate so it swings true. Typical wrought iron repair in Tampa runs $180 to $420 for hinge and picket work, and $600 to $1,400 if the post footing is rotted and needs to be reset in concrete.
Hinge Post Replacement
When the hinge post corrodes at ground level, the whole gate sags and scrapes the driveway. We recently rebuilt a heavy ornamental swing gate on Bayshore Boulevard after exactly this failure. The crew replaced the post footing, corrected the sag, and installed a new LiftMaster operator with surge protection so the entry system stopped frying during afternoon thunderstorms. That’s a standard job for us in waterfront neighborhoods.
Rust Repair and Repainting
Surface rust on pickets and scrollwork isn’t cosmetic in Tampa. Left alone, it becomes a structural problem within two or three rainy seasons. We grind the affected areas, treat the metal, and repaint with a marine-grade finish that holds up better near the bay.
Trusted Brands We Service in Tampa
We work on the equipment already installed at your property, not just the brands we sell. Our technicians are trained on LiftMaster, FAAC, BFT, and Mighty Mule systems, and we keep common parts for all four on our trucks in the Tampa metro. That means less waiting on parts shipments and more repairs finished the same day. We also provide Ghost Controls service in Tampa. Whether you have a Mighty Mule on a residential driveway or a BFT operator on a gated community entrance in New Tampa, we match the right part and the right programming to the system in front of us.
Common Gate Repair Problems We See in Tampa Homes
- Lightning-damaged control boards: Near-daily summer strikes surge through power lines and kill gate opener circuit boards. Many Tampa technicians keep spare boards on hand because one August storm can fill a week’s schedule. We install surge protection on every operator we touch, which stops most repeat failures before they happen.
- Rusted hinge posts on ornamental iron gates: Properties within a mile of the bay get constant salt air exposure, and the posts rot at ground level where water ponds after rain. The gate sags, scrapes, and eventually won’t latch. Repair means resetting the post in fresh concrete, not just tightening bolts.
- Jerking or stalling sliding gates: Roller bearings fill with sand and corrosion, the gate drags, and the motor trips its thermal limit mid-cycle. We see this most in neighborhoods with unpaved easements and heavy rain runoff, where grit washes onto the track every storm.
- Intermittent gate failures from cracked wire insulation: UV and salt air break down the coating on loop detector and photocell wiring over time. The gate works one day, refuses to close the next. We trace the circuit, replace the bad wire run, and seal the connections against moisture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Tampa, FL
You should know what gate repair costs before you pick up the phone. In Tampa, a basic hinge or alignment fix runs $150 to $300. Sliding gate track and roller work runs $220 to $480. Control board replacement after a lightning strike runs $350 to $750 depending on the brand. A full operator swap runs $450 to $900 for residential systems, and more for heavy commercial operators in gated communities. We give you a written price before any work starts, and that price does not move. Call (850) 533-8293 for a free estimate on your specific gate.
We Also Serve Cities Near Tampa
Our crews run routes through Dunedin, Clearwater, Palm Harbor, and Largo every week. If your property sits in a waterfront community in one of those cities, you’ll get the same written-price guarantee and the same background-checked technicians we send to Gate Repair in Tampa jobs. Scheduling is coordinated from the brand’s South FL office, and crews serve Tampa locally.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tampa
A lightning strike or power surge most likely fried the control board inside your gate operator. This is the single most common gate failure we see in Tampa, especially during the summer storm season. The fix is a board replacement, and we recommend adding a surge protector to the operator’s power supply so the next storm doesn’t do the same thing. Call (850) 533-8293 and we’ll diagnose it on site.
If your property is within two miles of the bay, have the gate inspected once a year. Salt air corrodes hinge posts, weld points, and lower pickets faster than homeowners expect, and a one-hour inspection catches problems while they’re still cheap to fix. We’ll check the posts, hinges, welds, operator, and safety sensors in a single visit.
A jerking sliding gate almost always points to worn or seized rollers, debris on the track, or a failing drive gear in the operator. In Tampa, sand and rain grit accelerate all three. We’ll rebuild the roller set and clean the track first, then test the motor under load to confirm it’s still healthy. Most sliding gate repairs are done same day.
Yes. We service gate operators throughout New Tampa, including the gated communities, and lightning-damaged control boards are a specialty for our crews in that area. We keep replacement boards for LiftMaster, FAAC, BFT, and Mighty Mule systems on the truck, so we can often complete the repair in one trip.
In most cases, yes. A sagging gate is usually caused by a rusted hinge post or worn hinge barrels, not a failed gate frame. We reset the post in concrete when needed, replace the hinges, and rehang the gate. The repair is covered by our written one-year guarantee. Call (850) 533-8293 and we’ll give you a straight answer on what your gate actually needs.
Contact Carver Gate Repair Tampa
If your gate won’t open, sags, or stopped working after the last storm, call us at (850) 533-8293. A live person answers, day or night. We’ll schedule a background-checked technician, give you a written price before anything is touched, and stand behind the repair for a full year. That’s the Garrison Standard, and it’s how every job in Tampa gets done.
Written by Lonnie Burke, Owner at Carver Gate Repair Tampa, serving Tampa and surrounding communities.