Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Temple Terrace
Gate repair in Temple Terrace means dealing with two very different generations of hardware: ornamental iron swing gates on the 1920s Mediterranean Revival estates off Bayshore Drive, and lightweight tubular aluminum slide gates on the 1970s ranches that fill the neighborhoods east of 56th Street. Most repairs run $180 to $550 depending on whether we’re replacing a hinge post, rebuilding a control board, or realigning a track that’s been knocked out by an oak limb. We dispatch from our Tampa operation with techs who know Temple Terrace streets well, and we answer the phone live around the clock. Call (850) 533-8293 for a written quote before any work starts.
Why Carver Gate Repair Tampa Is Temple Terrace’s Preferred Gate Repair Company
Temple Terrace homeowners have a specific problem with gate work: most generalist contractors treat it as a side job, show up late, and quote one number then hand over another. We don’t operate that way. Every repair we do in Temple Terrace runs on The Garrison Standard, which means a written price delivered before work begins, a background-checked and uniformed technician on site, and a 365-Day Done Right Promise on every repair in writing. If it fails inside that year, we come back and fix it at no charge.
Lonnie Burke runs this operation with a simple rule: answer the phone, show up when you say you will, and leave the gate working correctly. Our techs know the difference between a hinge post set in the sandy soil near the Hillsborough River and one set on solid ground off Fowler Avenue, because that difference changes how a repair should be done. No callbacks, no moving numbers, no excuses.
Styles & brands we work with
Metal Gate Repair in Temple Terrace
Metal Gate Repair in Temple Terrace covers the spectrum: heavy wrought-iron driveway gates on historic estates, lighter tubular aluminum gates on mid-century ranches, and everything bolted or welded in between. A typical repair in Temple Terrace runs $220 to $650, with the price driven by how much steel needs cutting, welding, or replacing. We give you the number in writing before we touch the gate.
Hinge and Post Work on Sandy Soil
The sandy soil under Temple Terrace shifts with heavy rain, and that movement eventually tilts hinge posts. When a post leans, the gate sags, the latch misses, and the operator strains against a load it wasn’t designed for. We excavate the footing, reset the post in fresh concrete, and rehang the gate so it swings level. On older iron gates, we also check for rust where the post meets the ground, since humidity and standing moisture eat the base faster here than up on higher ground in Tampa.
Weld and Rust Repair
Ornamental iron gates take a beating from Temple Terrace’s summer thunderstorms. Surface rust on hinges and latch posts is common, and left alone it becomes structural. We grind out the corrosion, weld in new material where the metal has thinned, and re-coat the repair. If a gate has rusted through in more than a couple of spots, we’ll tell you honestly whether repair or replacement is the cheaper path over the next five years.
Wood Gate Repair in Temple Terrace
Wood Gate Repair in Temple Terrace usually means one of two jobs: rehanging a sagging driveway gate, or replacing rotted stiles and rails on an older wooden gate that’s been soaked by years of afternoon storms. Most wood gate repairs here run $180 to $420, and we’ll quote the full number before we begin.
Sagging and Rotted Frames
The combination of high humidity and sprinkler overspray rots the bottoms of wooden gate frames in Temple Terrace faster than homeowners expect. When a gate drags on the ground or the latch won’t line up, the frame has usually twisted or the hinges are pulling out of softened wood. We repair what’s structurally sound and replace what isn’t, and we rebuild hinge mounts with longer screws and reinforcement plates when the wood has gone soft.
Gate Hardware Replacement
Old wooden gates often fail at the hardware before the wood gives out: hinge screws strip out, latch bolts bend, and drop rods snap. We stock heavy-duty hardware and fit it to the gate, then adjust the swing so it closes true. On gates with an operator, we check the arm travel and limit switches so the motor isn’t fighting a gate that no longer hangs square.
Trusted Brands We Service in Temple Terrace
We work on LiftMaster, FAAC, BFT, and Mighty Mule systems every week in Temple Terrace, along with several other brands. Because gate motor repair is all we do, we keep common control boards, arms, and safety sensors in local stock so a repair doesn’t stall waiting on a part. If your operator predates modern safety photocells, we’ll tell you straight whether a board swap is worth it or whether you’re better off replacing the operator while the gate itself stays.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Temple Terrace Homes
- Sandy-soil hinge post lean: The loose, sandy ground under Temple Terrace shifts with rain, letting hinge posts tilt and gates sag. We reset the post in new concrete and rehang the gate level.
- Oak limb damage on slide gates: On tree-lined streets near the Hillsborough River, falling limbs warp slide gate tracks or knock them out of alignment. We straighten or replace the rail and re-level the footings.
- Obsolete control boards: Many 1980s operators in Temple Terrace ranches have control boards that can’t accept modern safety photocells. A board-only repair is sometimes possible; other times the operator needs a full swap to meet current safety standards.
- Rust and corrosion from humidity: Daily afternoon thunderstorms and high humidity accelerate rust on iron hinges and corrosion on electrical connections. We grind, weld, and re-coat where the metal is still sound, and replace components that have thinned past the point of safe repair.
Pricing for Gate Repair in Temple Terrace, FL
Here’s what Temple Terrace homeowners typically pay. Hinge and post repair runs $180 to $380 depending on whether we’re resetting a footing or just replacing hardware. Weld and rust repair lands between $220 and $550 based on how much steel needs replacing. Control board replacement runs $250 to $500, and a full operator swap, which is often the right call on obsolete pre-safety systems, runs $700 to $1,400 installed. Every price is quoted and agreed in writing before any work starts, and every repair carries a one-year written guarantee. A free second visit is part of the deal if the repair fails inside that window. For an exact quote on your gate, call (850) 533-8293.
We Also Serve Cities Near Temple Terrace
Our crews handle Gate Repair throughout the greater Tampa area, including Temple Terrace’s neighbors in Tampa, Clearwater, Largo, and Palm Harbor. If you’re in Temple Terrace, you get the same written pricing and one-year guarantee as every other market we serve.
Serving Temple Terrace, FL - Our Local Coverage Area
We’re based in the Temple Terrace area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Temple Terrace
Temple Terrace’s sandy soil drains fast but shifts under heavy rain, and hinge posts set in it gradually lean. That lean makes the gate sag, the latch miss, and the operator strain. The fix is excavating the footing, pouring new concrete, and rehanging the gate so it swings level. Call (850) 533-8293 if your gate is dragging or the latch won’t line up.
In most cases yes. We can retrofit modern safety photocells and a newer operator onto an existing aluminum slide gate, assuming the track and rack are still straight. If the gate itself is structurally sound, you don’t need to replace it just to get current safety hardware. We’ll inspect the rail, check the rack meshing, and quote the upgrade in writing before any parts are ordered.
Live oak limbs falling on slide gates near the Hillsborough River typically warp the track rail or knock the roller carriages out of alignment, which makes the gate bind or stop mid-travel. We straighten or replace the rail, re-level the track footings, and test the operator’s limit switches so the gate doesn’t over-travel. On tree-heavy lots, an annual check of the track straightness can catch small bends before they become failures.
Not usually. A sagging ornamental iron gate almost always traces back to the hinge post leaning or the hinges themselves wearing out, not the panel failing. We reset the post, replace or rebuild the hinges, and rehang the panel. If the iron has rusted through at the hinge mounting points, we’ll weld in new material. Replacement only makes sense when the frame has rusted through in multiple locations, and we’ll show you the evidence either way.
Yes, especially if your gate is a solid panel rather than open pickets. Hurricane-force wind pushes a solid gate like a sail, and the load transfers straight into the hinge post and the operator arm. We check post depth, footing condition, hinge play, and whether the operator has a manual release that actually works, because if the power goes out you need to get the gate open. Call (850) 533-8293 for a wind-load check before the next storm season.
If your gate in Temple Terrace is sagging, rusting, or refusing to open, call (850) 533-8293. We’ll answer the phone, schedule a visit, and hand you a written price before any work starts.
Written by Lonnie Burke, Owner at Carver Gate Repair Tampa, operating to The Garrison Standard since 2008.